Step by step video instructions for building a Zenith CH750 kit aircraft

Play Video on YouTube

How we Built our Zenith
CruZer: FINISHING
A step by step video guide for builders of the popular Zenith CH750 CruZer aircraft kit.

.Return to Build Videos

This 2 part video (originally sold as a DVD) is a series of videos covering the entire build process for the CH750 CruZer kit. FINISHING is the final installment of the building process. It begins with mounting the horizontal tail: stabilizer, elevator, vertical fin and rudder. We demonstrate the construction of the pulleys and control cables for the tail. Balancing the elevator is shown, along with checking the travel motion required by the rudder and elevator. Next, the panel is installed along with the top skin, followed by rigging the wings and flaperons. Suggestions for fuel and wire routing are shown, although these will vary based on engine and panel requirements of the builder. The pictures on this page were captured from the actual video footage in order to show the scope of construction provided in this video volume.

Note: This production is not associated or endorsed by Zenith Aircraft. It does not replace or supersede the documentation provided with the kit. It is meant to be an aid in building the aircraft and its methods are presented only as a suggestion to builders.

This video is approximately 3.75 hours in length and is divided into various video chapters to make navigation and review of desired sections fast and easy )